Category Archives: Errors

Xbox 360

How to fix Xbox 360 controller wire

One of the beauties of modern computers is that in addition to the standard keyboard and mouse layout, you can use Xbox One controllers. But sometimes users may see a message that the USB device is not detected and this becomes a problem. In this article, we will tell you what to do if the controller does not work.

What causes controller malfunction

Looking in detail at the reasons why controllers can fail to work, the most frequent ones are:
• If the Xbox One controller doesn’t work on your computer, the USB device doesn’t show up on your computer, the USB device isn’t found, the USB device is permanently disconnected from your computer, it’s probably because of the drivers. And to solve this issue, these drivers need to be installed again.
• Xbox One USB controller device is not recognized – in this case, you need to check the Xbox wire, and sometimes it may be mismatched with your PC, and you will have to substitute it. Try reconnecting the controller
• The Xbox One USB controller is not working – occasionally this may be caused by your USB port. To figure out how to correct the issue, reconnect your controller to the USB port on the back of your PC and see if that resolves the issue.

Ways to fix the controller connection

Several effective ways to eliminate the error related to the controller plugging to the PC via USB device.
Method 1 – reinstall the controller drivers. To perform this, you will need to:
• Go to the Device Manager by pressing the Windows + X keys
• Once the menu opens in front of you, select your Xbox One controller, click on “Remove Device” and acknowledge your action
• After that, press the “Scan for hardware changes” token
After a few seconds, the driver will be reinstalled immediately.
Method 2 – Run the hardware and device troubleshooter
There are many ways to solve this issue on your Windows system. To utilize the diagnostic tool, you need to:
• Open the Settings application by using the Windows Key + I key combination
• When the Preferences application starts, go to the Update and Security section
• Click on the “Troubleshooting” tab on the left screen, select “Hardware Settings” and click “Run Troubleshooter”
Method 3 – Update your USB drivers
To do this, contact your USB mainboard vendor and load the most recent version of their drivers. This is easy to do if you know the model of your motherboard and where to look for the necessary drivers.
Method 4 – Disable antivirus and reinstall the driver.
Antivirus can meddle with some drivers and thus trigger problems with some devices. You may even have to uninstall the antivirus for a while to do the following.

Audio Renderer Error i

How to Fix an Audio Renderer Error in Windows 10

Users often complain about the error of the audio renderer on their computer. This error is not a Windows version problem, and it occurs in different web browsers. We’ll tell you about a few valid ways to help you deal with it.

Causes of audio renderer error

There are a number of causes for audio renderer error. Specifically:
1. Sound driver error – this error is repeated in some models of motherboards. Users who have encountered such a problem have found a temporary solution: reconnect the earphones, reboot the PC, or disable the audio driver for a while.
2. Collision of Windows sound driver and ASIO driver is an exact statement that the error appears when customers use Windows sound driver and ASIO driver with wrong frequencies of the sound format. The issue can be resolved by syncing the two frequencies.
3. Faulty BIOS version – most often problems of any sort on computers are due to an incorrect software update. Please refresh your BIOS to the most recent version to correct the issue.

Top 3 methods to fix audio renderer error

If you are now searching for a resolution to your sound rendering problem, this post will give you some sure-fire ways to fix it. And to find the results you want faster, we suggest reading the instructions listed in the order in which they are presented.
One of these methods is guaranteed to help you in your particular case.
Method 1: Troubleshooting sound in progress
The way is to run the embedded sound repairer to troubleshoot audio issues. This firmware tool includes a selection of recovery techniques that solve many sound-related issues.
To run this utility, do the next steps:
● Click the Windows + R keys to bring up the “Run” dialog box. Then enter “ms-settings: troubleshooting” and hit Enter. You will go to the Settings application’s Troubleshooting tab
● In the Troubleshooting tab, tap Play Audio, then launch the Troubleshooter
● Wait for the first scan to finish, choose the device you’re concerned with, and press “Next”
● The tool will analyze your setup for the issue, and if it’s found, it will offer a workaround. Simply go ahead and follow the on-screen instructions
● Reboot your PC and verify that the error has gone away.
Method 2: Turn off and on the audio driver again
To do this action, you need to:
● Press the Windows + R command, open the “Run” dialog box. Then type ” devmgmt.msc ” and press Enter
● In Device Manager, bring up the Sound, Video, and Game Controllers menu, and then turn off all audio adapters
● Wait a few seconds and then reactivate them by pressing the right mouse button and choosing Enable Device
Method 3: Rollback / Uninstall Audio Driver
This method is helpful if the problem was earlier triggered by a software error
● Go to the Device Manager with the same approach as described above
● Open the “Sound”, “Video” and “Game Controllers” menus and click on the audio adapter
● In the audio adapter settings, go to the “Driver” tab, click “Roll back driver” or “Uninstall device”
● Reload the system